Engine Gaskets amp Seals

Engine Gaskets & Seals Market Outlook

The global engine gaskets and seals market is projected to reach a value of approximately USD 9 billion by 2035, with a compound annual growth rate (CAGR) of around 4.5% during the forecast period of 2025-2035. The growth of this market can primarily be attributed to the increasing demand for engine efficiency and the rising concerns regarding vehicle emissions. Additionally, the booming automotive industry, particularly in developing economies, is significantly contributing to the market's expansion. The trend toward electric vehicles and hybrid technologies also fuels innovations in sealing solutions that cater to new engine designs. Furthermore, stringent regulations concerning automotive emissions are driving manufacturers to seek more effective sealing solutions to ensure optimal engine performance.

Growth Factor of the Market

The factors contributing to the growth of the engine gaskets and seals market include the rising number of vehicles on the road globally, which increases the demand for replacement and aftermarket parts. The continual advancements in gasket and seal materials that enhance performance and durability are also a key driver. Additionally, the growth in the aerospace and marine sectors is expanding the market reach beyond traditional automotive applications. The increasing investments in research and development to innovate sealing technologies, particularly with regard to electric powertrains, are providing new opportunities for market growth. Moreover, the growing trend of vehicle electrification is prompting manufacturers to develop new types of gaskets and seals that can withstand higher temperatures and pressures associated with alternative fuel systems.

Key Highlights of the Market

• The global engine gaskets and seals market is expected to witness a steady growth rate of 4.5% CAGR from 2025 to 2035.
• Head gaskets are predicted to hold the largest market share due to their critical function in engine performance.
• Automotive applications dominate the market, driven by the increasing production of passenger and commercial vehicles.
• Rubber remains the most widely used material for gaskets and seals, owing to its excellent flexibility and resistance to wear.
• Asia Pacific is anticipated to be the fastest-growing region, attributed to the rapid industrialization and automotive production in countries like China and India.

By Product Type

Head Gasket:

Head gaskets are crucial components that seal the interface between the engine block and the cylinder head, preventing coolant and oil from mixing with combustion gases. Given their importance in engine performance, any failure of the head gasket can lead to significant engine damage, making this segment a significant contributor to the overall market. With advancements in material technology, modern head gaskets are being designed to handle higher pressures and temperatures, which enhances their performance and longevity. Their increasing demand in both new vehicle production and the aftermarket is expected to sustain the growth of this segment, particularly in regions with a high concentration of automotive manufacturing.

Cylinder Gasket:

Cylinder gaskets are essential for sealing the internal combustion engine's cylinders, ensuring that combustion gases are contained within the cylinders. As vehicles utilize more advanced engine designs to improve performance and efficiency, the demand for high-quality cylinder gaskets is on the rise. Innovations in gasket materials, such as the use of multi-layer steel (MLS), are contributing to the increased reliability and performance of cylinder gaskets. This segment is also benefitting from the growing trend toward performance upgrades and modifications in the automotive market, where enthusiasts seek enhanced engine performance.

Oil Pan Gasket:

The oil pan gasket serves as a seal between the oil pan and the engine block, preventing oil leaks that could lead to catastrophic engine failures. Given the vital role it plays in maintaining proper oil levels and ensuring engine lubrication, the demand for oil pan gaskets is consistent across both new vehicles and the aftermarket. The segment's growth is propelled by the general maintenance practices of car owners who prioritize regular inspections and replacements of critical engine components. The rising awareness regarding engine maintenance and the growing automotive aftermarket are further expected to bolster the oil pan gasket market.

Timing Cover Gasket:

Timing cover gaskets are essential for sealing the timing cover of an engine, preventing oil leaks while ensuring that the timing components are properly lubricated. With the increasing complexity of engine designs, the need for high-performance timing cover gaskets is becoming more pronounced. As automotive manufacturers focus on enhancing engine efficiency and performance, the demand for technologically advanced timing cover gaskets is likely to increase. This segment is also expected to benefit from the growing trend of preventive maintenance, as car owners are becoming more aware of the importance of timely gasket replacement to prevent costly repairs.

Valve Cover Gasket:

The valve cover gasket seals the joint between the valve cover and the engine block, preventing oil from leaking into the engine bay. Its role in maintaining proper oil levels and engine cleanliness makes it a significant component within the engine assembly. As vehicles become more sophisticated, the valve cover gasket has evolved to meet higher performance expectations. Innovations in gasket materials and designs are expected to drive growth in this segment, particularly as more vehicles are equipped with turbocharged engines that generate greater pressure and heat. Regular servicing and maintenance of vehicles are anticipated to contribute positively to the demand for valve cover gaskets in the aftermarket.

By Application

Automotive:

The automotive application segment represents the largest portion of the engine gaskets and seals market due to the continuous demand for vehicles globally. With the increasing production of both passenger and commercial vehicles, the need for gaskets and seals is expected to rise. Additionally, stringent emission regulations are pushing automotive manufacturers to develop more efficient sealing solutions that enhance engine performance. The automotive aftermarket also plays a significant role, as vehicle owners frequently seek replacements for worn or damaged gaskets, further driving demand in this segment.

Marine:

The marine application segment is witnessing growth as advancements in boat and ship designs increase the need for reliable sealing solutions. Engine gaskets and seals in marine applications must withstand harsh environments, including saltwater exposure and high humidity, making material selection critical for durability. As recreational boating becomes more popular, the demand for high-performance marine engines and the components that support them, including gaskets and seals, is expected to grow. Furthermore, the increasing focus on fuel efficiency and emissions reduction in marine engines is prompting manufacturers to innovate and improve sealing technologies.

Industrial:

In the industrial application segment, engine gaskets and seals are critical components in machinery and equipment that require reliable sealing to prevent fluid leaks and maintain operational efficiency. The growth of the industrial sector, particularly in manufacturing and construction, is propelling the demand for robust gaskets and seals that can operate under high pressure and temperature conditions. As industries increasingly prioritize equipment reliability and uptime, the need for high-quality sealing solutions becomes paramount. The trend toward automation and advanced machinery is also driving innovation in this segment.

Aerospace:

The aerospace application segment is characterized by its demand for high-performance, lightweight, and highly durable engine gaskets and seals. With the increasing production of commercial and military aircraft, the need for reliable sealing solutions is on the rise. Aerospace components are subjected to extreme temperatures and pressures, requiring gaskets and seals that can withstand such conditions. As the aerospace industry continues to evolve, the emphasis on fuel efficiency and reduced emissions is likely to drive innovation in sealing technologies, which will further enhance the growth prospects of this segment.

Others:

Other applications for engine gaskets and seals include construction machinery, agricultural equipment, and power generation systems. These sectors often require specialized sealing solutions that can handle specific operational conditions, such as exposure to dirt, dust, and various fluids. The growing demand for heavy machinery in construction and agriculture is expected to contribute to the overall market for gaskets and seals. Furthermore, the trend of equipment maintenance and repairs in these sectors is likely to drive aftermarket sales, bolstering this segment's growth.

By Material Type

Rubber:

Rubber is the most commonly used material for engine gaskets and seals, known for its excellent flexibility, resilience, and resistance to wear and tear. Its properties make it an ideal choice for a range of sealing applications in various engine types. The production of rubber gaskets and seals is also relatively cost-effective, contributing to their widespread use in the automotive and industrial sectors. With continuous advancements in rubber technology, new compounds are being developed to improve performance under extreme temperatures and pressures, further driving the demand for rubber gaskets and seals.

Metal:

Metal gaskets are typically utilized in high-performance and high-pressure applications, where durability and resistance to extreme conditions are crucial. These gaskets are often constructed from materials like stainless steel or copper, providing excellent sealing capabilities. The increasing emphasis on performance in automotive and industrial applications is driving the demand for metal gaskets. Innovations in metal gasket technology, including multi-layered designs, are expanding their application scope and effectiveness, thus ensuring sustained growth in this segment.

Silicone:

Silicone gaskets are renowned for their high-temperature resistance and flexibility, making them suitable for a variety of applications, including automotive engines where temperature fluctuations are significant. The growing use of silicone in automotive applications stems from its ability to maintain a good seal under challenging conditions. Additionally, silicone is increasingly being utilized in electric vehicles due to its performance characteristics. As the automotive industry shifts toward more electric and hybrid technologies, the demand for silicone gaskets is expected to rise significantly.

Cork:

Cork gaskets have been historically used for sealing applications due to their unique properties that provide excellent compressibility and resilience. Although their usage is less common today compared to synthetic materials, they are still employed in specific applications, particularly in older engines and machinery where traditional materials were originally used. The growth of retrofitting and restoration projects in the automotive and industrial sectors is likely to provide opportunities for cork gaskets, albeit in a more niche capacity.

Fiber:

Fiber gaskets are often used in industries where lightweight materials are advantageous. These gaskets are typically made from a blend of organic and inorganic fibers, providing a combination of flexibility and strength. Their resistance to high temperatures and compressive loads makes them suitable for various engine applications. The demand for fiber gaskets is growing as industries seek to optimize weight without sacrificing performance, particularly in automotive and aerospace sectors where efficiency is critical. Innovations in fiber material technology continue to enhance the performance of fiber gaskets, contributing to their adoption across different applications.

By Vehicle Type

Passenger Cars:

The passenger car segment constitutes the largest share of the engine gaskets and seals market, driven by the increasing production and sales of personal vehicles worldwide. As consumer preferences evolve towards more efficient and high-performance cars, the demand for advanced sealing solutions is growing. With the rise in vehicle ownership in emerging markets, the market for replacement gaskets and seals in the aftermarket is also projected to expand significantly. Additionally, the trend of vehicle electrification and hybrid technologies is likely to create new opportunities for innovative gasket materials and designs tailored for these applications.

Commercial Vehicles:

Commercial vehicles, including trucks, buses, and vans, represent a significant portion of the engine gaskets and seals market due to their durability requirements and extensive usage. The growth of e-commerce and logistics sectors is boosting the demand for commercial vehicles, which in turn increases the need for reliable sealing solutions. The commercial vehicle market also requires gaskets that can withstand higher loads and temperatures, driving innovation and development in gasket technologies. As manufacturers focus on improving fuel efficiency and reducing emissions, there is a growing demand for advanced gaskets and seals tailored to these high-performance applications.

Off-Highway Vehicles:

Off-highway vehicles, including construction machinery, agricultural equipment, and mining vehicles, also contribute significantly to the engine gaskets and seals market. These vehicles operate under challenging conditions, necessitating robust and reliable sealing solutions to prevent fluid leaks and maintain optimal performance. The increasing demand for heavy machinery in construction and agriculture is expected to drive the growth of this segment. Additionally, advancements in off-highway vehicle designs that prioritize efficiency and reduced emissions are likely to create opportunities for innovative engine gaskets and seals tailored to these applications.

Two-Wheelers:

The two-wheeler segment is witnessing growth due to the rising popularity of motorcycles and scooters, especially in urban areas where they offer a convenient mode of transportation. With the increase in two-wheeler ownership, the demand for quality engine gaskets and seals in this segment is expected to rise accordingly. The growing focus on performance enhancements in two-wheelers is also prompting manufacturers to invest in high-quality sealing solutions that can withstand the rigors of daily use. The trend towards electric two-wheelers further emphasizes the need for innovative sealing technologies to support these new engine designs.

Others:

The “others” category includes various vehicle types that may not fit into the primary segments but still require engine gaskets and seals. This includes recreational vehicles (RVs), all-terrain vehicles (ATVs), and specialty vehicles used in various industries. While this segment may be smaller, it is characterized by a growing demand for high-quality sealing solutions as niche markets expand. The increase in recreational activities and the desire for off-road experiences are likely to drive growth in this segment, leading to a corresponding demand for effective gaskets and seals tailored to specific vehicle needs.

By Region

The North American engine gaskets and seals market is characterized by a mature automotive sector, with significant contributions from both the OEM and aftermarket segments. The increasing focus on fuel efficiency and emissions reduction, alongside the growing popularity of electric and hybrid vehicles, is driving innovations in gasket and seal technologies in this region. The market is projected to witness steady growth, supported by ongoing vehicle production and the need for replacement parts. Moreover, with the presence of major automotive manufacturers and robust supply chains, North America is expected to contribute significantly to the global market share in the upcoming years.

In Europe, the engine gaskets and seals market is expected to grow at a CAGR of around 4% from 2025 to 2035, driven by stringent emissions regulations and the push towards environmentally friendly vehicle technologies. The region’s strong automotive industry, characterized by a large number of OEMs and aftermarket players, is poised to support the growth of this market. Additionally, the increasing adoption of advanced manufacturing technologies, such as 3D printing and automation, is expected to enhance the production capabilities of gaskets and seals, further bolstering the market in Europe.

Opportunities

The engine gaskets and seals market presents numerous opportunities, particularly with the transition towards electric vehicles (EVs) and hybrid technologies. As automotive manufacturers pivot towards producing more electric and hybrid models, there is a growing demand for specialized gaskets and seals that cater to the unique requirements of electric drivetrains. These modern sealing solutions will need to endure varying temperatures, pressures, and chemical compositions associated with electric engines. Additionally, manufacturers focusing on R&D to innovate lightweight materials that enhance performance while reducing emissions will find significant opportunities in this evolving market landscape. There is also potential for growth in the electric vehicle segment as consumers increasingly shift their preferences towards sustainable transportation options.

Furthermore, the growing trend of vehicle customization and performance enhancements presents an exciting opportunity for gaskets and seals manufacturers. Enthusiasts often seek aftermarket modifications that require advanced sealing solutions to optimize engine performance and durability. This trend is particularly strong in the sports and luxury vehicle segments, where consumers are willing to invest in high-quality components. The increasing awareness of vehicle maintenance and the importance of using quality gaskets and seals will also drive growth in the aftermarket segment. Manufacturers who can leverage these trends and align their products with customer needs will be well-positioned to capitalize on the expanding opportunities within the engine gaskets and seals market.

Threats

Despite the promising growth prospects in the engine gaskets and seals market, several threats could hinder the market's expansion. One of the primary challenges is the rising competition from alternative sealing technologies, such as adhesives and sealants, which can provide cost-effective solutions for certain applications. As manufacturers explore various sealing methods, traditional gaskets and seals may face challenges to their market share. Additionally, the increasing trend toward lightweight materials in automotive design could lead to a gradual decline in the use of traditional gasket materials, impacting demand in the long term. Moreover, fluctuating raw material prices and supply chain disruptions, especially in the backdrop of global economic uncertainties, could pose significant challenges for manufacturers, affecting their profitability and operational efficiency.

Another considerable threat lies in the rapid advancements in technology that could outpace traditional manufacturing methods. The shift towards automation and digitalization in manufacturing processes may require substantial investments, which could pose financial burdens on smaller manufacturers. The need for continuous innovation to keep up with evolving consumer preferences and regulatory standards could further strain resources. Lastly, the ongoing shifts in the automotive industry, driven by electrification and autonomous vehicle technologies, may render certain traditional sealing solutions obsolete, forcing companies to adapt quickly or risk losing relevance in a highly competitive market.

Competitor Outlook

• ElringKlinger AG
• Mahle GmbH
• Fletcher Gaskets
• Victor Reinz
• AJUSA
• Cooper-Standard Automotive, Inc.
• Permatex
• Rheinmetall AG
• Federal-Mogul Corporation
• DANA Incorporated
• Textron Inc.
• 3M Company
• Henniges Automotive
• Gaskots International
• Victor Gaskets

The competitive landscape of the engine gaskets and seals market is characterized by a mix of established players and emerging companies striving to innovate and capture market share. Major manufacturers are heavily investing in research and development to enhance their product portfolios and offer advanced sealing solutions that meet the evolving needs of the automotive, aerospace, and industrial applications. Companies are increasingly focusing on collaborations, mergers, and acquisitions to strengthen their market position and expand their geographical reach. Furthermore, emphasis on sustainability and eco-friendly materials is driving innovation in the industry, with manufacturers exploring alternative materials for gasket and seal production.

ElringKlinger AG is a prominent player in the market, known for its comprehensive range of gaskets and sealing solutions tailored for automotive applications. The company has a strong focus on R&D, which allows it to deliver innovative products that comply with stringent emissions standards. Similarly, Mahle GmbH offers a diverse portfolio of sealing solutions and is recognized for its expertise in engine components. The company is engaged in developing state-of-the-art gaskets and seals that cater to the demands of modern engines, particularly in the context of electric vehicle technology. With its global presence and strong manufacturing capabilities, Mahle remains a key competitor in the engine gaskets and seals market.

In addition, Federal-Mogul Corporation is another significant player that specializes in various sealing technologies, catering to both light and heavy-duty vehicle segments. The company's focus on performance optimization and reducing emissions aligns with the industry's broader trends. Similarly, DANA Incorporated provides a wide range of sealing products, and its commitment to sustainability positions it well within the evolving market landscape. As the industry shifts towards advanced materials and engineering solutions, these major companies are anticipated to play a crucial role in shaping the future of the engine gaskets and seals market through continuous innovation and strategic partnerships.

• 1 Appendix

  • 1.1 List of Tables
  • 1.2 List of Figures

• 2 Introduction

  • 2.1 Market Definition
  • 2.2 Scope of the Report
  • 2.3 Study Assumptions
  • 2.4 Base Currency & Forecast Periods

• 3 Market Dynamics

  • 3.1 Market Growth Factors
  • 3.2 Economic & Global Events
  • 3.3 Innovation Trends
  • 3.4 Supply Chain Analysis

• 4 Consumer Behavior

  • 4.1 Market Trends
  • 4.2 Pricing Analysis
  • 4.3 Buyer Insights

• 5 Key Player Profiles

  • 5.1 AJUSA
    • 5.1.1 Business Overview
    • 5.1.2 Products & Services
    • 5.1.3 Financials
    • 5.1.4 Recent Developments
    • 5.1.5 SWOT Analysis
  • 5.2 Permatex
    • 5.2.1 Business Overview
    • 5.2.2 Products & Services
    • 5.2.3 Financials
    • 5.2.4 Recent Developments
    • 5.2.5 SWOT Analysis
  • 5.3 3M Company
    • 5.3.1 Business Overview
    • 5.3.2 Products & Services
    • 5.3.3 Financials
    • 5.3.4 Recent Developments
    • 5.3.5 SWOT Analysis
  • 5.4 Mahle GmbH
    • 5.4.1 Business Overview
    • 5.4.2 Products & Services
    • 5.4.3 Financials
    • 5.4.4 Recent Developments
    • 5.4.5 SWOT Analysis
  • 5.5 Textron Inc.
    • 5.5.1 Business Overview
    • 5.5.2 Products & Services
    • 5.5.3 Financials
    • 5.5.4 Recent Developments
    • 5.5.5 SWOT Analysis
  • 5.6 Victor Reinz
    • 5.6.1 Business Overview
    • 5.6.2 Products & Services
    • 5.6.3 Financials
    • 5.6.4 Recent Developments
    • 5.6.5 SWOT Analysis
  • 5.7 Rheinmetall AG
    • 5.7.1 Business Overview
    • 5.7.2 Products & Services
    • 5.7.3 Financials
    • 5.7.4 Recent Developments
    • 5.7.5 SWOT Analysis
  • 5.8 Victor Gaskets
    • 5.8.1 Business Overview
    • 5.8.2 Products & Services
    • 5.8.3 Financials
    • 5.8.4 Recent Developments
    • 5.8.5 SWOT Analysis
  • 5.9 ElringKlinger AG
    • 5.9.1 Business Overview
    • 5.9.2 Products & Services
    • 5.9.3 Financials
    • 5.9.4 Recent Developments
    • 5.9.5 SWOT Analysis
  • 5.10 Fletcher Gaskets
    • 5.10.1 Business Overview
    • 5.10.2 Products & Services
    • 5.10.3 Financials
    • 5.10.4 Recent Developments
    • 5.10.5 SWOT Analysis
  • 5.11 DANA Incorporated
    • 5.11.1 Business Overview
    • 5.11.2 Products & Services
    • 5.11.3 Financials
    • 5.11.4 Recent Developments
    • 5.11.5 SWOT Analysis
  • 5.12 Henniges Automotive
    • 5.12.1 Business Overview
    • 5.12.2 Products & Services
    • 5.12.3 Financials
    • 5.12.4 Recent Developments
    • 5.12.5 SWOT Analysis
  • 5.13 Gaskots International
    • 5.13.1 Business Overview
    • 5.13.2 Products & Services
    • 5.13.3 Financials
    • 5.13.4 Recent Developments
    • 5.13.5 SWOT Analysis
  • 5.14 Federal-Mogul Corporation
    • 5.14.1 Business Overview
    • 5.14.2 Products & Services
    • 5.14.3 Financials
    • 5.14.4 Recent Developments
    • 5.14.5 SWOT Analysis
  • 5.15 Cooper-Standard Automotive, Inc.
    • 5.15.1 Business Overview
    • 5.15.2 Products & Services
    • 5.15.3 Financials
    • 5.15.4 Recent Developments
    • 5.15.5 SWOT Analysis

• 6 Market Segmentation

  • 6.1 Engine Gaskets amp Seals Market, By Application
    • 6.1.1 Automotive
    • 6.1.2 Marine
    • 6.1.3 Industrial
    • 6.1.4 Aerospace
    • 6.1.5 Others
  • 6.2 Engine Gaskets amp Seals Market, By Product Type
    • 6.2.1 Head Gasket
    • 6.2.2 Cylinder Gasket
    • 6.2.3 Oil Pan Gasket
    • 6.2.4 Timing Cover Gasket
    • 6.2.5 Valve Cover Gasket
  • 6.3 Engine Gaskets amp Seals Market, By Vehicle Type
    • 6.3.1 Passenger Cars
    • 6.3.2 Commercial Vehicles
    • 6.3.3 Off-Highway Vehicles
    • 6.3.4 Two-Wheelers
    • 6.3.5 Others
  • 6.4 Engine Gaskets amp Seals Market, By Material Type
    • 6.4.1 Rubber
    • 6.4.2 Metal
    • 6.4.3 Silicone
    • 6.4.4 Cork
    • 6.4.5 Fiber

• 7 Competitive Analysis

  • 7.1 Key Player Comparison
  • 7.2 Market Share Analysis
  • 7.3 Investment Trends
  • 7.4 SWOT Analysis

• 8 Research Methodology

  • 8.1 Analysis Design
  • 8.2 Research Phases
  • 8.3 Study Timeline

• 9 Future Market Outlook

  • 9.1 Growth Forecast
  • 9.2 Market Evolution

• 10 Geographical Overview

  • 10.1 Europe - Market Analysis
    • 10.1.1 By Country
      • 10.1.1.1 UK
      • 10.1.1.2 France
      • 10.1.1.3 Germany
      • 10.1.1.4 Spain
      • 10.1.1.5 Italy
  • 10.2 Asia Pacific - Market Analysis
    • 10.2.1 By Country
      • 10.2.1.1 India
      • 10.2.1.2 China
      • 10.2.1.3 Japan
      • 10.2.1.4 South Korea
  • 10.3 Latin America - Market Analysis
    • 10.3.1 By Country
      • 10.3.1.1 Brazil
      • 10.3.1.2 Argentina
      • 10.3.1.3 Mexico
  • 10.4 North America - Market Analysis
    • 10.4.1 By Country
      • 10.4.1.1 USA
      • 10.4.1.2 Canada
  • 10.5 Middle East & Africa - Market Analysis
    • 10.5.1 By Country
      • 10.5.1.1 Middle East
      • 10.5.1.2 Africa
  • 10.6 Engine Gaskets amp Seals Market by Region

• 11 Global Economic Factors

  • 11.1 Inflation Impact
  • 11.2 Trade Policies

• 12 Technology & Innovation

  • 12.1 Emerging Technologies
  • 12.2 AI & Digital Trends
  • 12.3 Patent Research

• 13 Investment & Market Growth

  • 13.1 Funding Trends
  • 13.2 Future Market Projections

• 14 Market Overview & Key Insights

  • 14.1 Executive Summary
  • 14.2 Key Trends
  • 14.3 Market Challenges
  • 14.4 Regulatory Landscape

Segments Analyzed in the Report

The global Engine Gaskets amp Seals market is categorized based on

By Product Type

• Head Gasket
• Cylinder Gasket
• Oil Pan Gasket
• Timing Cover Gasket
• Valve Cover Gasket

By Application

• Automotive
• Marine
• Industrial
• Aerospace
• Others

By Material Type

• Rubber
• Metal
• Silicone
• Cork
• Fiber

By Vehicle Type

• Passenger Cars
• Commercial Vehicles
• Off-Highway Vehicles
• Two-Wheelers
• Others

By Region

• North America
• Europe
• Asia Pacific
• Latin America
• Middle East & Africa

Key Players

• ElringKlinger AG
• Mahle GmbH
• Fletcher Gaskets
• Victor Reinz
• AJUSA
• Cooper-Standard Automotive, Inc.
• Permatex
• Rheinmetall AG
• Federal-Mogul Corporation
• DANA Incorporated
• Textron Inc.
• 3M Company
• Henniges Automotive
• Gaskots International
• Victor Gaskets