Carburetor

Carburetor Market Outlook

The global carburetor market is poised for substantial growth, projecting a market size of approximately USD 4.5 billion by 2035, with a compound annual growth rate (CAGR) of around 5% during the forecast period from 2025 to 2035. The growth of this market can be attributed to the resurgence of interest in classic cars and motorcycles, which often utilize carburetors in their fuel systems. Moreover, the increasing demand for fuel-efficient systems in automotive applications is pushing manufacturers to innovate and enhance carburetor designs. Furthermore, a growing focus on emissions reduction and fuel economy is driving the demand for advanced carburetor technologies. The ongoing expansion of the automotive and motorcycle industries, particularly in developing regions, is also expected to significantly contribute to the market growth.

Growth Factor of the Market

The carburetor market is experiencing a positive trajectory due to several key factors contributing to its growth. One of the primary drivers is the increasing adoption of carburetors in vintage and classic automobiles, which have seen a resurgence among enthusiasts and collectors. This trend is bolstered by the growing number of automotive restoration projects that prioritize traditional fuel systems over modern electronic fuel injection systems. Additionally, the rising popularity of motorcycles as an economical and efficient mode of transportation, especially in densely populated urban areas, is fueling the demand for motorcycle carburetors. Furthermore, as consumers become more environmentally conscious, manufacturers are investing in the development of carburetors that optimize fuel efficiency and reduce emissions, aligning with global trends toward sustainability. Finally, the expansion of distribution channels, including online retail platforms, is making carburetor options more accessible to consumers, thereby driving market growth.

Key Highlights of the Market

• The market is expected to reach USD 4.5 billion by 2035, growing at a CAGR of around 5%.
• There is a significant increase in demand for carburetors in vintage and classic automotive restoration projects.
• Motorcycle carburetor usage is on the rise due to the growing popularity of motorcycles in urban commuting.
• Investment in eco-friendly carburetors that optimize fuel efficiency is gaining momentum in line with sustainability trends.
• Increased penetration of online retail platforms has improved accessibility and consumer reach for carburetor products.

By Product Type

Single Barrel Carburetor:

Single barrel carburetors are among the simplest types of carburetors available, primarily utilized in smaller engines where performance requirements are modest. These carburetors utilize a single venturi to mix air and fuel, making them easy to adjust and maintain. Their design is particularly beneficial for fuel efficiency, but they may lack the power output found in more complex carburetor types. This simplicity makes them a popular choice in applications such as small motorcycles and low-powered vehicles, where maximizing fuel economy is often prioritized over performance. As demand for compact and economical engines rises, single barrel carburetors are likely to see sustained interest in the market.

Two Barrel Carburetor:

Two barrel carburetors feature two venturis, enabling them to provide increased air and fuel flow compared to single barrel options. These carburetors are commonly found in a range of applications, from casual automobiles to performance vehicles, delivering a balance of efficiency and power. The dual setup allows for better throttle response, greater fuel atomization, and overall improved performance, making them suitable for a broader spectrum of engines. Moreover, ongoing advancements in their design have led to the development of more efficient models that reduce emissions while enhancing engine output, contributing to their continued relevance in the automotive market.

Four Barrel Carburetor:

Four barrel carburetors are designed for high-performance applications and vehicles that require more fuel and air mixture to maximize power. With two sets of venturis, they allow for significant airflow, catering to powerful engines, especially in muscle cars and racing vehicles. While they provide exceptional power and torque, their complexity also poses challenges in tuning and maintenance. However, the performance benefits they offer have made them a popular choice among automotive enthusiasts and racers. The growing trend towards performance-oriented modifications in the automotive realm is expected to continue driving demand for four barrel carburetors in the foreseeable future.

Dual Carburetor:

Dual carburetors are often used in performance applications where dual intake manifolds are present, allowing for optimum air-fuel mixing and engine performance. By distributing fuel more efficiently across multiple cylinders, they enhance throttle response and overall power output. These carburetors are particularly favored in sports cars and custom builds, as they provide an avenue for achieving higher horsepower and torque levels. While dual carb setups can be more complicated to tune and adjust, the performance gains they offer make them a sought-after choice for those looking to maximize their engine’s capabilities. As the performance tuning culture continues to rise, dual carburetors are likely to remain in demand.

Motorcycle Carburetor:

Motorcycle carburetors specifically cater to the unique requirements of motorcycle engines, which often necessitate different tuning and fuel delivery mechanisms than cars. These carburetors are designed to be compact and lightweight, promoting better handling and maneuverability in bikes. The ongoing popularity of motorcycles, particularly in urban settings, is bolstering the demand for these specialized carburetors. Additionally, advancements in technology have led to the development of motorcycle carburetors that optimize fuel efficiency and performance while minimizing emissions, aligning with global environmental regulations. Consequently, the motorcycle carburetor segment is expected to witness strong growth in the coming years.

By Application

Automotive:

The automotive sector remains the largest application segment for carburetors, as they are integral to the functioning of various vehicle types. While modern vehicles increasingly use fuel injection systems, carburetors are still prevalent in older models, classic cars, and certain regions where carbureted engines are preferred. The automotive segment also includes recreational vehicles and performance cars, which often utilize carburetors for their simplicity and robustness. Moreover, the rising trend of vehicle restorations has rekindled interest in carburetors, driving demand in this application segment as enthusiasts seek to maintain authentic performance characteristics.

Motorcycle:

Motorcycles represent a significant application area for carburetors, as many two-wheeled vehicles still rely on this technology for fuel delivery. Motorcycle carburetors are designed to be lightweight and compact, enhancing the overall performance and handling of the bike. With urban commuting gaining popularity, the demand for motorcycles has surged, consequently boosting the need for motorcycle carburetors. Additionally, manufacturers are focusing on developing advanced carburetor systems that improve fuel efficiency and reduce emissions, ensuring compliance with increasingly stringent environmental regulations. As the motorcycle market continues to expand, the role of carburetors will remain crucial in delivering performance and efficiency.

Aviation:

The aviation industry utilizes carburetors in light aircraft and vintage airplanes, where simplicity and reliability are paramount. These carburetors are designed to operate efficiently at varying altitudes and temperatures, making them suitable for aviation applications. Despite the growing popularity of fuel injection systems in modern aviation, the robustness of carburetors ensures that they maintain relevance, especially in smaller aircraft. The niche market for light aircraft, alongside a resurgence in interest for vintage planes, is expected to sustain demand for aviation carburetors. Moreover, ongoing innovations aimed at enhancing carburetor performance in aviation settings may further propel this segment.

Marine:

In the marine application segment, carburetors are essential for many types of boats, particularly those using outboard and inboard engines. These carburetors are designed to withstand harsh marine conditions while providing optimal fuel delivery and performance. As boating and recreational fishing continue to gain popularity, the demand for reliable marine carburetors is expected to increase. Furthermore, manufacturers are developing carburetors that can operate efficiently in varying water conditions, addressing the specific needs of marine applications. The growth of the marine industry, along with the push for enhanced performance and fuel efficiency, positions this application segment for continued growth.

Industrial:

Industrial applications of carburetors are generally found in various machinery and equipment that rely on internal combustion engines. Their simplicity and effectiveness in fuel mixing make them valuable in industrial settings, particularly in construction and agricultural machinery. The demand for robust and reliable engines in these sectors ensures that carburetors remain a viable choice, despite the rise of alternative fuel systems. Furthermore, advancements in carburetor technology that improve fuel efficiency and reduce emissions are likely to boost their adoption within industrial applications. As industries continue to evolve and demand more efficient machinery, carburetors are expected to maintain their relevance and application.

By Distribution Channel

OEM:

Original Equipment Manufacturers (OEMs) play a crucial role in the distribution of carburetors, as they supply these components for new vehicles and machinery. The OEM segment is characterized by steady demand, driven by the production and sales of new automotive and industrial equipment. Manufacturers often collaborate closely with OEMs to ensure that their carburetors meet specific performance and regulatory standards. As the automotive market continues to grow, particularly in emerging economies, the OEM distribution channel is poised for consistent growth, reinforcing the presence of carburetors in new vehicle production.

Aftermarket:

The aftermarket distribution channel for carburetors comprises sales of replacement parts and performance upgrades, catering to consumers looking to enhance their vehicles’ performance or maintain older models. The rising interest in automotive restoration and modification projects is a significant factor driving the aftermarket segment. Consumers increasingly seek performance-enhancing carburetors and replacement components for vintage cars and motorcycles. Furthermore, the growing accessibility of online platforms has expanded the reach of aftermarket carburetor suppliers, facilitating easier shopping experiences and contributing to market growth in this channel.

Online Retailers:

Online retailers are becoming increasingly important in the carburetor market, providing consumers with a convenient and accessible platform to purchase various carburetor types. The rise of e-commerce has allowed customers to compare products, read reviews, and make informed purchasing decisions from the comfort of their homes. Online retailers cater to a diverse consumer base, ranging from automotive enthusiasts to everyday vehicle owners seeking replacement parts. Additionally, the availability of detailed product specifications and competitive pricing online drives consumer choice towards this distribution channel, further enhancing its significance in the overall carburetor market.

Brick-and-Mortar Stores:

Brick-and-mortar stores continue to serve as vital distribution points for carburetors, offering consumers the advantage of immediate access to parts and expert advice. Many enthusiasts prefer visiting physical stores where they can consult knowledgeable staff and obtain recommendations tailored to their specific needs. These establishments are particularly important in regions where online shopping may not be the preferred option. Additionally, local auto parts stores often stock a variety of carburetors and related components, catering to the needs of both casual consumers and performance-focused customers. Despite the rise of online distribution, brick-and-mortar stores remain a significant player in the carburetor market.

Distributors:

Distributors serve as intermediaries between manufacturers and retailers, facilitating the efficient movement of carburetors to various sales channels. They are essential in managing inventory and ensuring that product availability aligns with market demand. Distributors often handle a diverse range of carburetor types, catering to both OEM and aftermarket needs. As the automotive and industrial sectors continue to evolve, distributors play a vital role in adapting to changing trends and consumer preferences. Their relationships with manufacturers enable them to stay updated on the latest innovations and technologies, ensuring that customers have access to the most effective carburetor solutions available in the market.

By Fuel Type

Gasoline:

Gasoline remains the primary fuel type for carburetors, as they are widely used in many automotive and motorcycle applications. Carburetors designed for gasoline engines are optimized for fuel delivery, ensuring efficient combustion and performance. The increasing number of gasoline-powered vehicles on the road ensures sustained demand for gasoline carburetors. Furthermore, manufacturers continue to innovate in this segment, developing carburetors that enhance fuel efficiency while adhering to stringent environmental regulations. As the automotive industry evolves, gasoline carburetors are expected to retain their significance and continue to adapt to meet performance and emission standards.

Diesel:

Diesel carburetors are less common than gasoline ones due to the predominance of diesel fuel injection systems in modern diesel engines. However, carburetors still find applications in certain niche markets, including older diesel-powered vehicles and machinery. These carburetors are designed to operate efficiently with diesel fuel, providing reliable performance in specialized applications. While the diesel segment may not experience the same growth rate as gasoline, it remains an important area for manufacturers catering to specific markets where diesel carburetors are still relevant. The continued use of diesel in some sectors ensures that there will be a demand for carburetors designed for this fuel type.

Ethanol:

Ethanol-carbureted engines have gained popularity due to the push for more environmentally friendly fuel options. Carburetors designed for ethanol fuel must accommodate the unique properties of ethanol, such as its different combustion characteristics and potential for higher moisture absorption. As governments promote the use of biofuels and renewable energy sources, the demand for ethanol-compatible carburetors is expected to grow. The increasing consumer interest in sustainable fuel alternatives is likely to drive innovation in this segment, as manufacturers develop carburetors that maximize the efficiency and performance of ethanol-powered engines.

Biodiesel:

Biodiesel, similar to ethanol, presents opportunities for carburetors in applications focused on sustainability. Carburetors designed to work with biodiesel must be engineered to handle the specific properties of this renewable fuel, including its chemical composition and viscosity. The rising demand for biodiesel as an alternative fuel source in the transportation and industrial sectors is likely to create a niche market for biodiesel carburetors. Manufacturers are increasingly investing in research and development to create carburetors that optimize biodiesel performance while minimizing environmental impact, reinforcing the segment’s growth potential.

LPG:

Liquid Petroleum Gas (LPG) carburetors are utilized in engines configured to run on LPG, which is known for its cleaner-burning properties compared to traditional fuels. These carburetors must be specifically designed to manage the unique characteristics of LPG, such as its lower density and higher vaporization temperature. The demand for LPG as a fuel alternative has been rising, particularly in regions focusing on reducing air pollution and greenhouse gas emissions. LPG carburetors are increasingly being employed in commercial vehicles, agricultural machinery, and even some passenger vehicles due to their environmental benefits. As regulatory frameworks continue to evolve, the market for LPG carburetors is expected to expand in response to growing interest in cleaner fuel options.

By Region

The North American region holds a significant share of the carburetor market, driven primarily by the strong presence of automotive and motorcycle industries. The region is home to several major manufacturers and a high number of performance car enthusiasts, which contributes to sustained demand for carburetors across various applications. The market in North America is expected to grow at a CAGR of around 4% between 2025 and 2035, bolstered by trends such as automotive restoration and the increasing popularity of motorcycles. The region's focus on performance vehicles and customization further strengthens the position of carburetors within the overall automotive ecosystem.

In Europe, the carburetor market is witnessing a resurgence, particularly among vintage car enthusiasts and in motorsport applications. As European countries push for stricter emissions regulations, manufacturers are innovating to produce carburetors that meet these requirements while optimizing performance. The European market is expected to experience steady growth, driven by consumer interest in classic vehicles and the ongoing demand for performance upgrades. Meanwhile, the Asia Pacific region is rapidly emerging as a key player in the carburetor market, spurred by growing automotive production and rising motorcycle ownership. Countries like India and China are experiencing burgeoning demand for carburetors as their automotive sectors expand, contributing significantly to the regional market.

Opportunities

The carburetor market is poised to capitalize on several emerging opportunities, particularly within the automotive restoration segment. As classic cars gain popularity among enthusiasts, the demand for authentic and high-performance carburetors is likely to experience a significant boost. Restoration projects often aim to maintain or improve the original performance characteristics of these vehicles, creating a robust market for aftermarket carburetor suppliers. Additionally, the increasing interest in retro-style bikes and custom motorcycle builds presents opportunities for carburetor manufacturers to design products that cater to this niche market, allowing them to differentiate themselves with innovative and specialized solutions tailored to the unique needs of enthusiasts.

Moreover, the global shift towards sustainability and environmental consciousness is opening doors for carburetor manufacturers to innovate and adapt their products. The growing adoption of alternative fuels, such as ethanol and biodiesel, allows manufacturers to develop carburetors designed specifically for these fuel types. By creating efficient and effective carburetor systems that maximize the benefits of renewable fuels, companies can position themselves as leaders in a burgeoning market focused on reducing emissions. Additionally, as governments around the world implement policies promoting cleaner transportation solutions, there is a substantial opportunity for carburetor manufacturers to align their products with these goals, further enhancing their market presence and growth potential.

Threats

One of the primary threats facing the carburetor market stems from the increasing adoption of electronic fuel injection (EFI) systems in modern vehicles. As automotive technology evolves, manufacturers are increasingly favoring EFI for its superior fuel efficiency, performance, and emissions control compared to carburetors. This paradigm shift poses a direct challenge to the carburetor market, as vehicle manufacturers may phase out carburetors entirely in favor of more advanced technologies. While carburetors still hold relevance in vintage and performance applications, the overarching trend towards EFI may hinder overall market growth in the long term, necessitating adaptive strategies from carburetor manufacturers to remain competitive.

Additionally, the global push towards stricter emissions regulations may present a challenge for carburetor manufacturers, particularly for those that have not yet adapted their products to meet evolving standards. As environmental concerns gain prominence, consumers and manufacturers alike are increasingly prioritizing fuel efficiency and emissions control in their purchasing decisions. Failure to comply with regulations could lead to decreased market share for traditional carburetor manufacturers, limiting their growth potential and necessitating investment in R&D to develop cleaner, more efficient products. This dynamic landscape requires manufacturers to remain agile and proactive in addressing regulatory shifts and consumer preferences to avoid potential setbacks.

Competitor Outlook

• Holley Performance Products
• Weber Carburetors
• Edelbrock LLC
• SU Carburetors
• Dellorto
• Zenith Carburetors
• Keihin Corporation
• MIKUNI Corporation
• Stromberg Carburetors
• So Cal Speed Shop
• Air Flow Research
• Barry Grant
• Rochester Products
• Redline Performance
• American Carburetor Company

The competitive landscape of the carburetor market is characterized by a mix of established players and niche manufacturers. Major companies such as Holley Performance Products and Edelbrock LLC dominate the market, offering a wide range of carburetors tailored for different applications, including racing and street performance. These companies invest heavily in research and development to innovate and adapt their products to meet evolving consumer demands and regulatory standards. The presence of these key players not only shapes market dynamics but also sets the pace for technological advancements in carburetor design and performance optimization.

In addition to major manufacturers, there are several specialized companies that focus on niche segments within the carburetor market, such as vintage automotive applications and custom motorcycle builds. Firms like Weber Carburetors and SU Carburetors have carved out strong positions by providing high-quality products that cater to specific consumer segments. Their commitment to craftsmanship and performance has established them as trusted brands among enthusiasts and restorers alike. As consumer preferences shift towards specialized and high-performance carburetors, these niche players are poised to capture significant market share.

Emerging competitors in the carburetor market are also leveraging advanced manufacturing technologies and materials to enhance product performance and sustainability. Companies like MIKUNI Corporation and Keihin Corporation are focused on developing carburetors that optimize fuel efficiency and reduce emissions, aligning their offerings with global sustainability trends. As the market continues to evolve, these emerging players will play a crucial role in driving innovation and meeting the changing needs of consumers. The competitive landscape will likely continue to adapt, with a blend of established and emerging companies working to define the future of the carburetor market.

• 1 Appendix

  • 1.1 List of Tables
  • 1.2 List of Figures

• 2 Introduction

  • 2.1 Market Definition
  • 2.2 Scope of the Report
  • 2.3 Study Assumptions
  • 2.4 Base Currency & Forecast Periods

• 3 Market Dynamics

  • 3.1 Market Growth Factors
  • 3.2 Economic & Global Events
  • 3.3 Innovation Trends
  • 3.4 Supply Chain Analysis

• 4 Consumer Behavior

  • 4.1 Market Trends
  • 4.2 Pricing Analysis
  • 4.3 Buyer Insights

• 5 Key Player Profiles

  • 5.1 Dellorto
    • 5.1.1 Business Overview
    • 5.1.2 Products & Services
    • 5.1.3 Financials
    • 5.1.4 Recent Developments
    • 5.1.5 SWOT Analysis
  • 5.2 Barry Grant
    • 5.2.1 Business Overview
    • 5.2.2 Products & Services
    • 5.2.3 Financials
    • 5.2.4 Recent Developments
    • 5.2.5 SWOT Analysis
  • 5.3 Edelbrock LLC
    • 5.3.1 Business Overview
    • 5.3.2 Products & Services
    • 5.3.3 Financials
    • 5.3.4 Recent Developments
    • 5.3.5 SWOT Analysis
  • 5.4 SU Carburetors
    • 5.4.1 Business Overview
    • 5.4.2 Products & Services
    • 5.4.3 Financials
    • 5.4.4 Recent Developments
    • 5.4.5 SWOT Analysis
  • 5.5 Air Flow Research
    • 5.5.1 Business Overview
    • 5.5.2 Products & Services
    • 5.5.3 Financials
    • 5.5.4 Recent Developments
    • 5.5.5 SWOT Analysis
  • 5.6 So Cal Speed Shop
    • 5.6.1 Business Overview
    • 5.6.2 Products & Services
    • 5.6.3 Financials
    • 5.6.4 Recent Developments
    • 5.6.5 SWOT Analysis
  • 5.7 Weber Carburetors
    • 5.7.1 Business Overview
    • 5.7.2 Products & Services
    • 5.7.3 Financials
    • 5.7.4 Recent Developments
    • 5.7.5 SWOT Analysis
  • 5.8 Keihin Corporation
    • 5.8.1 Business Overview
    • 5.8.2 Products & Services
    • 5.8.3 Financials
    • 5.8.4 Recent Developments
    • 5.8.5 SWOT Analysis
  • 5.9 MIKUNI Corporation
    • 5.9.1 Business Overview
    • 5.9.2 Products & Services
    • 5.9.3 Financials
    • 5.9.4 Recent Developments
    • 5.9.5 SWOT Analysis
  • 5.10 Rochester Products
    • 5.10.1 Business Overview
    • 5.10.2 Products & Services
    • 5.10.3 Financials
    • 5.10.4 Recent Developments
    • 5.10.5 SWOT Analysis
  • 5.11 Zenith Carburetors
    • 5.11.1 Business Overview
    • 5.11.2 Products & Services
    • 5.11.3 Financials
    • 5.11.4 Recent Developments
    • 5.11.5 SWOT Analysis
  • 5.12 Redline Performance
    • 5.12.1 Business Overview
    • 5.12.2 Products & Services
    • 5.12.3 Financials
    • 5.12.4 Recent Developments
    • 5.12.5 SWOT Analysis
  • 5.13 Stromberg Carburetors
    • 5.13.1 Business Overview
    • 5.13.2 Products & Services
    • 5.13.3 Financials
    • 5.13.4 Recent Developments
    • 5.13.5 SWOT Analysis
  • 5.14 American Carburetor Company
    • 5.14.1 Business Overview
    • 5.14.2 Products & Services
    • 5.14.3 Financials
    • 5.14.4 Recent Developments
    • 5.14.5 SWOT Analysis
  • 5.15 Holley Performance Products
    • 5.15.1 Business Overview
    • 5.15.2 Products & Services
    • 5.15.3 Financials
    • 5.15.4 Recent Developments
    • 5.15.5 SWOT Analysis

• 6 Market Segmentation

  • 6.1 Carburetor Market, By Fuel Type
    • 6.1.1 Gasoline
    • 6.1.2 Diesel
    • 6.1.3 Ethanol
    • 6.1.4 Biodiesel
    • 6.1.5 LPG
  • 6.2 Carburetor Market, By Application
    • 6.2.1 Automotive
    • 6.2.2 Motorcycle
    • 6.2.3 Aviation
    • 6.2.4 Marine
    • 6.2.5 Industrial
  • 6.3 Carburetor Market, By Product Type
    • 6.3.1 Single Barrel Carburetor
    • 6.3.2 Two Barrel Carburetor
    • 6.3.3 Four Barrel Carburetor
    • 6.3.4 Dual Carburetor
    • 6.3.5 Motorcycle Carburetor

• 7 Competitive Analysis

  • 7.1 Key Player Comparison
  • 7.2 Market Share Analysis
  • 7.3 Investment Trends
  • 7.4 SWOT Analysis

• 8 Research Methodology

  • 8.1 Analysis Design
  • 8.2 Research Phases
  • 8.3 Study Timeline

• 9 Future Market Outlook

  • 9.1 Growth Forecast
  • 9.2 Market Evolution

• 10 Geographical Overview

  • 10.1 Europe - Market Analysis
    • 10.1.1 By Country
      • 10.1.1.1 UK
      • 10.1.1.2 France
      • 10.1.1.3 Germany
      • 10.1.1.4 Spain
      • 10.1.1.5 Italy
  • 10.2 Carburetor Market by Region
  • 10.3 Asia Pacific - Market Analysis
    • 10.3.1 By Country
      • 10.3.1.1 India
      • 10.3.1.2 China
      • 10.3.1.3 Japan
      • 10.3.1.4 South Korea
  • 10.4 Latin America - Market Analysis
    • 10.4.1 By Country
      • 10.4.1.1 Brazil
      • 10.4.1.2 Argentina
      • 10.4.1.3 Mexico
  • 10.5 North America - Market Analysis
    • 10.5.1 By Country
      • 10.5.1.1 USA
      • 10.5.1.2 Canada
  • 10.6 Middle East & Africa - Market Analysis
    • 10.6.1 By Country
      • 10.6.1.1 Middle East
      • 10.6.1.2 Africa

• 11 Global Economic Factors

  • 11.1 Inflation Impact
  • 11.2 Trade Policies

• 12 Technology & Innovation

  • 12.1 Emerging Technologies
  • 12.2 AI & Digital Trends
  • 12.3 Patent Research

• 13 Investment & Market Growth

  • 13.1 Funding Trends
  • 13.2 Future Market Projections

• 14 Market Overview & Key Insights

  • 14.1 Executive Summary
  • 14.2 Key Trends
  • 14.3 Market Challenges
  • 14.4 Regulatory Landscape

Segments Analyzed in the Report

The global Carburetor market is categorized based on

By Product Type

• Single Barrel Carburetor
• Two Barrel Carburetor
• Four Barrel Carburetor
• Dual Carburetor
• Motorcycle Carburetor

By Application

• Automotive
• Motorcycle
• Aviation
• Marine
• Industrial

By Fuel Type

• Gasoline
• Diesel
• Ethanol
• Biodiesel
• LPG

By Region

• North America
• Europe
• Asia Pacific
• Latin America
• Middle East & Africa

Key Players

• Holley Performance Products
• Weber Carburetors
• Edelbrock LLC
• SU Carburetors
• Dellorto
• Zenith Carburetors
• Keihin Corporation
• MIKUNI Corporation
• Stromberg Carburetors
• So Cal Speed Shop
• Air Flow Research
• Barry Grant
• Rochester Products
• Redline Performance
• American Carburetor Company