Underwater Connectors

Underwater Connectors Market Outlook

The global underwater connectors market is poised for significant growth, with a projected value of approximately USD 4.5 billion by 2035, expanding at a compound annual growth rate (CAGR) of around 6.5% during the forecast period from 2025 to 2035. The growth of this market can be attributed to the increasing offshore exploration activities in the oil and gas industry, along with the rising demand for advanced underwater communication systems in military and defense applications. Additionally, the growing focus on renewable energy sources, such as offshore wind farms, is propelling the market further. Technological advancements, coupled with the need for reliable underwater connectivity solutions, are driving the adoption of specialized connectors that can withstand harsh marine environments. Furthermore, the expansion of telecommunications infrastructure in underwater environments is expected to contribute to the steady demand for underwater connectors.

Growth Factor of the Market

One of the primary growth factors for the underwater connectors market is the increasing investment in offshore oil and gas exploration activities, as companies seek to tap into underwater reserves to meet the escalating energy demands globally. Moreover, the continuous development of subsea robotics and remotely operated vehicles (ROVs) requires robust and reliable connector solutions to ensure efficient operations under water. The expansion of renewable energy sources, particularly offshore wind power, has led to an increased need for connectors that can facilitate energy transmission and communication between wind turbines and onshore facilities. Another significant contributor is the rising demand for advanced underwater communication networks, which necessitate the use of specialized connectors to ensure seamless data transfer. Additionally, the increasing focus on research and scientific exploration in underwater ecosystems is further driving the market, as these activities require sophisticated connectors that can work effectively in various underwater conditions.

Key Highlights of the Market

• The global underwater connectors market is expected to grow at a CAGR of 6.5% from 2025 to 2035.
• Oil & Gas applications dominate the market, accounting for a significant share due to increased offshore drilling activities.
• Technological advancements in connector designs are leading to enhanced reliability and performance in harsh underwater environments.
• The growing focus on renewable energy, particularly offshore applications, is driving innovative connector solutions.
• North America is anticipated to hold the largest market share, driven by substantial investments in offshore exploration and military applications.

By Product Type

Dry Mate Connectors:

Dry mate connectors are specifically designed for connecting underwater devices without the need for a wet mating process. These connectors feature a robust design that ensures a reliable connection while preventing water ingress, making them suitable for both shallow and deep-water applications. The dry mate connector segment is crucial for industries such as offshore oil and gas exploration, where the connectors may need to be mated and unmated at the surface. Their ease of use and ability to withstand harsh environmental conditions drive their popularity in various underwater applications, including ROVs and subsea production systems. The demand for these connectors is expected to rise with the increasing number of underwater installations and the need for regular maintenance and equipment upgrades.

Wet Mate Connectors:

Wet mate connectors are designed to be mated and unmated in underwater environments, allowing for easy connection without the need to bring equipment to the surface. This feature is essential in applications where regular maintenance and reconfiguration are necessary, such as in underwater telecommunications and data networks. Wet mate connectors utilize specialized sealing mechanisms to ensure that the connection remains water-tight, protecting sensitive electronic components from corrosion and damage. As underwater exploration and monitoring activities continue to expand, the demand for wet mate connectors is expected to increase, particularly in the military, telecommunications, and oil and gas sectors where continuous underwater connectivity is critical.

Underwater Electrical Connectors:

Underwater electrical connectors are integral components for transmitting electrical power and signals in underwater environments. These connectors are designed to withstand extreme pressures and corrosive marine conditions, making them ideal for applications in oil and gas exploration, ROVs, and underwater sensors. The underwater electrical connector market is growing as industries increasingly adopt automation and advanced technologies that require reliable power supply and communication lines. Technological advancements in materials and designs are leading to more durable and efficient electrical connectors, which are critical for ensuring the longevity and reliability of underwater systems.

Underwater Fiber Optic Connectors:

Underwater fiber optic connectors are vital for high-speed data transmission in marine applications, providing reliable and fast communication links. These connectors are designed to maintain optical performance even in harsh underwater conditions, ensuring minimal signal loss. As the demand for data and communication capabilities increases in subsea applications—such as telecommunication networks and offshore monitoring systems—the underwater fiber optic connector segment is poised for growth. Innovations in manufacturing techniques and materials are enhancing the performance and reliability of these connectors, making them essential in underwater data communication frameworks.

Underwater Hybrid Connectors:

Underwater hybrid connectors combine both electrical and fiber optic capabilities into one single connector, facilitating the simultaneous transmission of power and data. This adaptability is particularly appealing in applications where space and weight are critical, such as in compact subsea systems or ROVs. The underwater hybrid connector market is anticipated to grow significantly as industries look for integrated solutions that reduce the number of connectors required in underwater installations. The versatility and efficiency of these connectors make them suitable for various applications, from offshore energy systems to underwater robotics and telecommunications.

By Application

Military & Defense:

The military and defense sector is a significant application area for underwater connectors, as they are vital for various underwater operations, including surveillance, reconnaissance, and communication systems. Underwater connectors used in this application are designed to meet stringent performance and durability standards, capable of withstanding extreme environmental conditions. The rising investments in naval defense systems and underwater robotics are driving the demand for advanced underwater connectors in military applications. As nations continue to enhance their maritime capabilities, the need for reliable and secure underwater communication links will further propel this segment.

Oil & Gas:

The oil and gas industry stands as the largest application segment for underwater connectors, driven by the need for robust and reliable systems for underwater drilling, production, and monitoring. With the increasing exploration of deep-water reserves and the rise of subsea production facilities, the demand for connector solutions that can withstand high pressure and corrosive environments is crucial. Underwater connectors are employed in various applications, including subsea pipeline monitoring, ROV operations, and data transmission from underwater sensors. As the global demand for energy continues to grow, the oil and gas sector's reliance on innovative underwater technologies will drive the continued expansion of this market segment.

Renewable Energy:

Renewable energy is an emerging application area for underwater connectors, particularly with the growth of offshore wind farms and tidal energy systems. These connectors are essential for transmitting power and data between offshore turbines and onshore facilities, ensuring efficient energy flow. The need for reliable connectors that can operate effectively in harsh marine environments is driving innovations in design and material selection. As governments and corporations increasingly invest in sustainable energy sources, the demand for specialized underwater connectors in the renewable energy sector is expected to grow, contributing to the overall expansion of the market.

Telecommunications:

Underwater connectors play a crucial role in the telecommunications sector, particularly in the establishment and maintenance of underwater communication networks that connect various offshore facilities and coastal regions. These connectors are designed for both data transmission and power supply, ensuring seamless communication in underwater environments. As the demand for high-speed internet and communication technologies continues to rise, especially with the expansion of underwater fiber optic networks, the telecommunications application segment is set to experience significant growth. The continuous development of advanced underwater communication solutions will further enhance the market for underwater connectors in this sector.

Scientific Research:

The scientific research application for underwater connectors involves their use in a variety of marine exploration and environmental monitoring projects. These connectors facilitate the connection of sensors, cameras, and other scientific instruments deployed underwater, allowing for real-time data collection and analysis. The increasing emphasis on marine conservation and climate change studies is driving demand for reliable underwater connectors that can operate in challenging conditions. As research initiatives expand into deeper and more remote underwater environments, the need for specialized connectors that ensure effective data transmission will continue to rise, bolstering this segment of the market.

By Distribution Channel

Direct Sales:

Direct sales represent a significant distribution channel for underwater connectors, providing manufacturers and suppliers with the opportunity to engage directly with end-users. This channel allows for specialized services, including tailored solutions and technical support, enhancing customer satisfaction. Many key players in the underwater connectors market prefer direct sales to ensure that they maintain control over the customer experience and can offer customized products based on specific project requirements. As industries evolve and the demand for specific connector solutions increases, direct sales will remain a fundamental channel for distribution.

Distributors:

Distributors play a vital role in the underwater connectors market by acting as intermediaries between manufacturers and end-users. They help in expanding market reach and providing localized support for customers, which is particularly important in regions with extensive underwater projects. Distributors often maintain a diverse inventory of underwater connector solutions, ensuring that clients have access to a wide range of products. This channel is essential for manufacturers looking to penetrate new markets and provide timely delivery of products, especially in rapidly growing sectors such as oil and gas and renewable energy.

Online Retailers:

Online retailers are becoming an increasingly popular distribution channel for underwater connectors, driven by the growth of e-commerce and the convenience it offers to customers. This channel allows users to compare various products, read reviews, and make informed decisions from the comfort of their homes or offices. Online retailers often provide extensive product information, specifications, and customer support, facilitating a seamless purchasing experience. The rise of online sales in the underwater connectors market is expected to continue, particularly as more buyers seek quick access to specialized products without the need for direct interactions with sales teams.

Rental Companies:

Rental companies also represent a significant distribution channel in the underwater connectors market, particularly in industries where equipment is frequently needed for temporary projects. Many companies prefer to rent specialized connectors and other underwater equipment to reduce capital expenditure and ensure they have the latest technology for their operations. This rental model is particularly beneficial in the oil and gas sector, where projects may have varying timelines and require specific technology for short durations. As the demand for efficient and cost-effective solutions grows, rental companies will continue to play a crucial role in the distribution of underwater connectors.

OEMs:

Original Equipment Manufacturers (OEMs) are key players in the underwater connectors market, as they often incorporate these connectors into their products and systems. By partnering with connector manufacturers, OEMs can offer integrated solutions that enhance the performance and reliability of their underwater equipment. This relationship is vital for creating high-quality systems that require specialized connectors, particularly in industries such as telecommunications, military, and renewable energy. As the market for integrated underwater systems expands, the collaboration between OEMs and underwater connector manufacturers will be instrumental in driving innovation and ensuring product quality.

By Material Type

Titanium:

Titanium is a preferred material for underwater connectors due to its exceptional strength, corrosion resistance, and lightweight properties. These characteristics make titanium connectors ideal for deep-sea applications where high pressure and harsh marine environments are prevalent. Titanium connectors are commonly used in the oil and gas sector, as well as military applications, where reliability and performance are critical. The rising demand for durable and long-lasting connectors is driving the growth of titanium-based solutions in the underwater connectors market, particularly as industries continue to explore deeper waters.

Stainless Steel:

Stainless steel is another widely used material for underwater connectors, known for its excellent corrosion resistance and robustness. Stainless steel connectors are suitable for a variety of underwater applications, including oil and gas exploration, telecommunications, and scientific research. The versatility of stainless steel allows for the manufacturing of connectors that can withstand extreme environmental conditions while ensuring effective performance. As the demand for reliable underwater connectivity solutions continues to grow, stainless steel connectors are expected to remain a popular choice across various industries.

Aluminum:

Aluminum is used in underwater connectors, particularly for applications where weight is a significant factor. Aluminum connectors provide a balance between strength and lightweight properties, making them suitable for ROVs and underwater vehicles. While they may not offer the same level of corrosion resistance as titanium or stainless steel, advancements in coatings and protective treatments are enhancing their durability for underwater use. The continued development of lightweight and efficient underwater systems is likely to drive the growth of aluminum connectors in specific applications, particularly where buoyancy is essential.

Plastic:

Plastic connectors are increasingly being utilized in the underwater connectors market due to their lightweight nature, cost-effectiveness, and resistance to corrosion. These connectors are often employed in non-critical applications where the operating conditions are less demanding. The ability to manufacture plastic connectors in various shapes and sizes allows for flexibility in design, catering to specific industry needs. As industries seek more economical solutions for underwater connectivity, the demand for plastic connectors is expected to increase, particularly in less extreme applications.

Rubber:

Rubber is primarily used in underwater connectors as a sealing material, providing essential protection against water ingress and environmental elements. Rubber sealing solutions are crucial for maintaining the integrity and performance of connectors in underwater applications. The use of rubber in conjunction with other materials enhances the overall reliability and durability of underwater connectors, ensuring they can perform effectively in diverse conditions. As the demand for high-performance underwater solutions continues to rise, the role of rubber in connector design will remain critical.

By Region

The underwater connectors market exhibits significant regional differences, with North America leading the way in terms of market share and growth potential. In North America, the market is expected to reach a value of approximately USD 1.7 billion by 2035, driven largely by substantial investments in offshore oil and gas exploration and military applications. The region benefits from advanced technological capabilities and a strong focus on innovation, making it a hub for underwater connector advancements. Additionally, the growing emphasis on renewable energy projects, such as offshore wind farms, is further fueling market expansion in North America. The CAGR for this region is projected to be around 7% during the forecast period, indicating robust growth prospects.

Europe is another significant region for the underwater connectors market, estimated to reach a value of USD 1.3 billion by 2035. The region is characterized by a strong emphasis on renewable energy, with many countries investing in offshore wind and tidal energy projects. Furthermore, the increase in deep-sea exploration and the need for reliable underwater communication systems in military and research applications are contributing to the growth of the market in Europe. The CAGR for Europe is estimated to be approximately 6% during the same forecast period. Meanwhile, Asia Pacific is expected to showcase rapid growth due to rising offshore exploration activities and expanding telecommunications infrastructure, although its total market size will remain below that of North America and Europe.

Opportunities

The underwater connectors market is poised for numerous opportunities, particularly in the renewable energy sector. As countries worldwide strive to meet their energy needs through sustainable sources, the development and expansion of offshore wind farms and tidal power plants are gaining momentum. These projects require specialized underwater connectors that can withstand marine environments while ensuring efficient power transmission and communication. The increasing investment in renewable energy infrastructure provides a substantial opportunity for underwater connector manufacturers to innovate and develop new solutions tailored to the unique challenges of underwater applications. In addition, the potential for collaboration between connector manufacturers and renewable energy developers will facilitate the creation of advanced connector systems that enhance the performance of underwater energy solutions.

Another opportunity lies in the defense and military applications of underwater connectors. With growing geopolitical tensions and an increasing focus on maritime security, nations are investing heavily in their naval capabilities and underwater surveillance systems. This development is driving the demand for high-performance underwater connectors that can facilitate reliable communications, data transfer, and power supply in challenging underwater environments. As defense budgets expand globally, the underwater connectors market is well-positioned to capitalize on this trend, especially as innovative technologies and advanced materials are developed to meet the specific needs of military applications.

Threats

Despite the positive outlook for the underwater connectors market, there exist certain threats that could impact growth. One of the primary threats is the volatility in raw material prices, particularly for metals like titanium and stainless steel, which are crucial for manufacturing robust underwater connectors. Fluctuations in the prices of these materials can lead to increased production costs and potential delays in project timelines, which may deter investment in new underwater projects. Additionally, the emergence of alternative materials and technologies could disrupt the market, as industries may shift toward more economical or efficient solutions. As the underwater connectors market evolves, manufacturers must remain vigilant about changes in material availability and technological advancements to maintain their competitive edge.

Moreover, regulatory challenges imposed by various governments can present a restraint to market growth. Environmental regulations concerning offshore exploration and marine activities may limit the scope of projects and increase compliance costs for companies operating in the underwater connectors field. Adhering to stringent environmental standards can lead to longer project timelines and additional investments in compliance measures, which may deter potential projects, particularly in the oil and gas sector. Consequently, stakeholders in the underwater connectors market must navigate these challenges carefully to sustain growth and capitalize on emerging opportunities.

Competitor Outlook

• TE Connectivity Ltd.
• Subsea 7 S.A.
• Oceaneering International, Inc.
• Fischer Connectors SA
• Amphenol Corporation
• Hydro Group Plc
• MacArtney A/S
• General Cable Corporation
• Deep Ocean Group Holdings Plc
• Sea Tech Services, Inc.
• HARTING Technology Group
• Belden Inc.
• J.F. Lehman & Company
• W. L. Gore & Associates, Inc.
• TE Connectivity Ltd.

The competitive landscape of the underwater connectors market is characterized by a diverse range of players, including both established companies and emerging innovators. Major companies are focusing on strategic partnerships and collaborations to enhance their technological capabilities and expand their product offerings. Additionally, these companies are investing in research and development to come up with advanced materials and designs that can provide superior performance in harsh underwater conditions. The increasing demand for specialized underwater connectors for various applications, including military, oil and gas, and renewable energy, is encouraging companies to differentiate themselves through unique product features and customization options.

TE Connectivity Ltd. stands out as a leading player in the underwater connectors market, known for its extensive range of high-performance connector solutions. The company focuses on innovation and has developed connectors that are suitable for extreme environments, including subsea applications. TE Connectivity's commitment to quality and reliability has positioned it as a trusted partner for major industries, including military, oil and gas, and telecommunications. Furthermore, the company is actively pursuing partnerships with technology developers to keep pace with industry advancements and ensure its product offerings remain competitive.

Another prominent player in the market is Oceaneering International, Inc., which specializes in providing engineering solutions and underwater services. The company is known for its expertise in subsea technology and offers a wide array of underwater connector solutions tailored to meet the specific needs of various industries. Oceaneering's focus on research and development allows it to continuously innovate and provide advanced solutions, positioning it well in the growing underwater connectors market. In addition, the company’s strong brand reputation and established relationships with key clients in the oil and gas sector enhance its market presence and competitive advantage.

• 1 Appendix

  • 1.1 List of Tables
  • 1.2 List of Figures

• 2 Introduction

  • 2.1 Market Definition
  • 2.2 Scope of the Report
  • 2.3 Study Assumptions
  • 2.4 Base Currency & Forecast Periods

• 3 Market Dynamics

  • 3.1 Market Growth Factors
  • 3.2 Economic & Global Events
  • 3.3 Innovation Trends
  • 3.4 Supply Chain Analysis

• 4 Consumer Behavior

  • 4.1 Market Trends
  • 4.2 Pricing Analysis
  • 4.3 Buyer Insights

• 5 Key Player Profiles

  • 5.1 Belden Inc.
    • 5.1.1 Business Overview
    • 5.1.2 Products & Services
    • 5.1.3 Financials
    • 5.1.4 Recent Developments
    • 5.1.5 SWOT Analysis
  • 5.2 MacArtney A/S
    • 5.2.1 Business Overview
    • 5.2.2 Products & Services
    • 5.2.3 Financials
    • 5.2.4 Recent Developments
    • 5.2.5 SWOT Analysis
  • 5.3 Subsea 7 S.A.
    • 5.3.1 Business Overview
    • 5.3.2 Products & Services
    • 5.3.3 Financials
    • 5.3.4 Recent Developments
    • 5.3.5 SWOT Analysis
  • 5.4 Hydro Group Plc
    • 5.4.1 Business Overview
    • 5.4.2 Products & Services
    • 5.4.3 Financials
    • 5.4.4 Recent Developments
    • 5.4.5 SWOT Analysis
  • 5.5 Amphenol Corporation
    • 5.5.1 Business Overview
    • 5.5.2 Products & Services
    • 5.5.3 Financials
    • 5.5.4 Recent Developments
    • 5.5.5 SWOT Analysis
  • 5.6 TE Connectivity Ltd.
    • 5.6.1 Business Overview
    • 5.6.2 Products & Services
    • 5.6.3 Financials
    • 5.6.4 Recent Developments
    • 5.6.5 SWOT Analysis
  • 5.7 Fischer Connectors SA
    • 5.7.1 Business Overview
    • 5.7.2 Products & Services
    • 5.7.3 Financials
    • 5.7.4 Recent Developments
    • 5.7.5 SWOT Analysis
  • 5.8 J.F. Lehman & Company
    • 5.8.1 Business Overview
    • 5.8.2 Products & Services
    • 5.8.3 Financials
    • 5.8.4 Recent Developments
    • 5.8.5 SWOT Analysis
  • 5.9 Sea Tech Services, Inc.
    • 5.9.1 Business Overview
    • 5.9.2 Products & Services
    • 5.9.3 Financials
    • 5.9.4 Recent Developments
    • 5.9.5 SWOT Analysis
  • 5.10 HARTING Technology Group
    • 5.10.1 Business Overview
    • 5.10.2 Products & Services
    • 5.10.3 Financials
    • 5.10.4 Recent Developments
    • 5.10.5 SWOT Analysis
  • 5.11 General Cable Corporation
    • 5.11.1 Business Overview
    • 5.11.2 Products & Services
    • 5.11.3 Financials
    • 5.11.4 Recent Developments
    • 5.11.5 SWOT Analysis
  • 5.12 Deep Ocean Group Holdings Plc
    • 5.12.1 Business Overview
    • 5.12.2 Products & Services
    • 5.12.3 Financials
    • 5.12.4 Recent Developments
    • 5.12.5 SWOT Analysis
  • 5.13 W. L. Gore & Associates, Inc.
    • 5.13.1 Business Overview
    • 5.13.2 Products & Services
    • 5.13.3 Financials
    • 5.13.4 Recent Developments
    • 5.13.5 SWOT Analysis
  • 5.14 Oceaneering International, Inc.
    • 5.14.1 Business Overview
    • 5.14.2 Products & Services
    • 5.14.3 Financials
    • 5.14.4 Recent Developments
    • 5.14.5 SWOT Analysis

• 6 Market Segmentation

  • 6.1 Underwater Connectors Market, By Application
    • 6.1.1 Military & Defense
    • 6.1.2 Oil & Gas
    • 6.1.3 Renewable Energy
    • 6.1.4 Telecommunications
    • 6.1.5 Scientific Research
  • 6.2 Underwater Connectors Market, By Product Type
    • 6.2.1 Dry Mate Connectors
    • 6.2.2 Wet Mate Connectors
    • 6.2.3 Underwater Electrical Connectors
    • 6.2.4 Underwater Fiber Optic Connectors
    • 6.2.5 Underwater Hybrid Connectors
  • 6.3 Underwater Connectors Market, By Material Type
    • 6.3.1 Titanium
    • 6.3.2 Stainless Steel
    • 6.3.3 Aluminum
    • 6.3.4 Plastic
    • 6.3.5 Rubber
  • 6.4 Underwater Connectors Market, By Distribution Channel
    • 6.4.1 Direct Sales
    • 6.4.2 Distributors
    • 6.4.3 Online Retailers
    • 6.4.4 Rental Companies
    • 6.4.5 OEMs

• 7 Competitive Analysis

  • 7.1 Key Player Comparison
  • 7.2 Market Share Analysis
  • 7.3 Investment Trends
  • 7.4 SWOT Analysis

• 8 Research Methodology

  • 8.1 Analysis Design
  • 8.2 Research Phases
  • 8.3 Study Timeline

• 9 Future Market Outlook

  • 9.1 Growth Forecast
  • 9.2 Market Evolution

• 10 Geographical Overview

  • 10.1 Europe - Market Analysis
    • 10.1.1 By Country
      • 10.1.1.1 UK
      • 10.1.1.2 France
      • 10.1.1.3 Germany
      • 10.1.1.4 Spain
      • 10.1.1.5 Italy
  • 10.2 Asia Pacific - Market Analysis
    • 10.2.1 By Country
      • 10.2.1.1 India
      • 10.2.1.2 China
      • 10.2.1.3 Japan
      • 10.2.1.4 South Korea
  • 10.3 Latin America - Market Analysis
    • 10.3.1 By Country
      • 10.3.1.1 Brazil
      • 10.3.1.2 Argentina
      • 10.3.1.3 Mexico
  • 10.4 North America - Market Analysis
    • 10.4.1 By Country
      • 10.4.1.1 USA
      • 10.4.1.2 Canada
  • 10.5 Middle East & Africa - Market Analysis
    • 10.5.1 By Country
      • 10.5.1.1 Middle East
      • 10.5.1.2 Africa
  • 10.6 Underwater Connectors Market by Region

• 11 Global Economic Factors

  • 11.1 Inflation Impact
  • 11.2 Trade Policies

• 12 Technology & Innovation

  • 12.1 Emerging Technologies
  • 12.2 AI & Digital Trends
  • 12.3 Patent Research

• 13 Investment & Market Growth

  • 13.1 Funding Trends
  • 13.2 Future Market Projections

• 14 Market Overview & Key Insights

  • 14.1 Executive Summary
  • 14.2 Key Trends
  • 14.3 Market Challenges
  • 14.4 Regulatory Landscape

Segments Analyzed in the Report

The global Underwater Connectors market is categorized based on

By Product Type

• Dry Mate Connectors
• Wet Mate Connectors
• Underwater Electrical Connectors
• Underwater Fiber Optic Connectors
• Underwater Hybrid Connectors

By Application

• Military & Defense
• Oil & Gas
• Renewable Energy
• Telecommunications
• Scientific Research

By Distribution Channel

• Direct Sales
• Distributors
• Online Retailers
• Rental Companies
• OEMs

By Material Type

• Titanium
• Stainless Steel
• Aluminum
• Plastic
• Rubber

By Region

• North America
• Europe
• Asia Pacific
• Latin America
• Middle East & Africa

Key Players

• TE Connectivity Ltd.
• Subsea 7 S.A.
• Oceaneering International, Inc.
• Fischer Connectors SA
• Amphenol Corporation
• Hydro Group Plc
• MacArtney A/S
• General Cable Corporation
• Deep Ocean Group Holdings Plc
• Sea Tech Services, Inc.
• HARTING Technology Group
• Belden Inc.
• J.F. Lehman & Company
• W. L. Gore & Associates, Inc.
• TE Connectivity Ltd.